Loading... Please wait...

FraudLabs Pro Prevents Fraud for Digital Businesses

Our Newsletter


SaniFlo SANICUBIC 2 Duplex Grinder Package

  • SaniCubic Duplex Grinder Installed
RRP:
$3,192.00
Your Price:
$2,713.20 (You save $478.80)
SKU:
029
Brand:
Availability:
Usually ships in 3 to 5 business days!
Quantity:


Product Description

SaniFlo SANICUBIC 2 Heavy Duty Duplex Grinder Pump

Possible connections

Toilet Sink
Shower Bathtub
Washing Machine (indirect connection) Laundry Sink
Kitchen Sink Dishwasher

Vertical and horizontal discharges: 36 Vertical ft  328 Horizontal ft

 

The SaniFlo Sanicubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications.  The SaniFlo duplex-grinder system made of stainless steel liquifies solids into small particles prior to being passed through the 1-1/2” discharge.  It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more.

This new SaniFlo SaniCubic system consists of two 1-HP motors housed inside a compact but highly durable plastic enclosure.  Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc.           

The SaniFlo Sanicubic 2 operation is as simple as the installation.  The effluent enters the pump through one of five different inlets – one on either side of the unit at the bottom and three along the top.  The inlets can accommodate 1-1/2” or 4” diameter pipes.  As soon as the wastewater level reaches the trigger point, the pumping system activates.  The effluent is then pumped out through 1-1/2” diameter rigid pipe connected on the top of the pump.  Maximum pumping distances are 36 Ft vertically and/or 328 Ft horizontally.

The inside of the SaniFlo Sanicubic 2 comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, and of a couple of motors, which drive the stainless steel cutting blades and the pump.  The motors are sealed for life in an oil filled enclosure.  A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum.  Water and organic waste matter that enter the enclosure are reduced to slurry and are picked up by the impeller mounted beneath the motor.  

The two grinders inside the SaniFlo Sanicubic 2 are engineered to operate alternately.  They each take turns handling the wastewater so that neither is more heavily used over time than the other.  However, if either pump ceases to operate, the other pump will run full-time until servicing can eliminate the problem.

One of the many features of the SaniFlo Sanicubic 2, is the smart-pump operation.  A single pump is able to handle up to 50 gpm.  If the incoming rate is higher than the discharge rate, the pump automatically signals the “overload” stage.  This will activate the second pump and both pumps will operate simultaneously until the condition is alleviated.  When both pumps are in operation, the discharge rate increases roughly 80%.  In this event, a visual LED alarm on the unit will switch to red as well as the mounted audible alarm will go off.

Note that the effluent pipe leading into the pump has to be installed with the required ¼” per foot gravity flow.  There must be a 10” height difference (from pump to connecting fixture) if the drain is connected to the bottom inlet.

The wastewater from other sanitary fixtures is discharged into the SaniFlo Sanicubic 2 via five 1½-inch or 4” inlets, on either side of the housing and on the top of the enclosure.  The internal discharge pipes come equipped with check valves that prevent back flow into the unit.  Isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely.

This unit has been designed with a 1-1/2” vent connection on the top of the enclosure.  All plumbing codes require connection to a vent system.  Please note that the vent system should be a two-way air vent.  The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. 

The Sanicubic 2 has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9. 

The SaniFlo Sanicubic 2 is ordered as a single unit only.  No other fixtures are included.

*** For this system, it requires at least two bottles of our Descaler to be used in order to have better effect on the system.


Warranty Information

Saniflo offers a 2-year warranty for the pumps and a 1-year warranty for the toilet bowl and tank. The warranty starts from the date of purchase.

The warranty is voided when any foreign objects are found in the macerating unit. Pouring automobile anti-freeze, solvents paintings, acids, alkaloids, plastic bags, metal, plastic material, wood or anything that could halt, damage or corrode the unit, voids warranty. The motor is filled with oil and sealed for life at the factory; draining the oil out of the motor voids warranty as well.

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Related Products

You Recently Viewed...