Loading... Please wait...

FraudLabs Pro Prevents Fraud for Digital Businesses

Our Newsletter


SaniFlo SANISHOWER small gray water pump

  • SaniShower small gray water pump installed
RRP:
$365.00
Your Price:
$310.25 (You save $54.75)
SKU:
010
Brand:
Availability:
Usually ships in 3 to 5 business days!
Quantity:


Product Description

SaniFlo SANISHOWER Small Gray Water Pump

Possible connections

Sink Shower

Vertical and horizontal discharges: 12 Vertical ft  100 Horizontal ft

 

The SaniFlo SaniShower is a small gray water pump that may be used to pump waste water away from a shower, sink, bar sink, or other fixture.  The SaniFlo SaniShower is small enough to fit underneath a raised shower base.  Alternatively, it can be placed behind a wall or beside a shower.  The SaniFlo Sanishower will pump wastewater up to 12 feet in height and/or 100 feet away from a soil stack.

As a point of interest; quite a few pedicure manufacturers are putting the SaniFlo Sanishower inside pedicure chairs.  Due to its quiet operation and ease of installation, they have become the choice of OEM’s. 

The inside of the SaniFlo SaniShower is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump.

When the water enters the SaniFlo SaniShower, it activates a micro switch in the pressure chamber, which in turn starts the motor.  The motor is sealed for life in an oil filled enclosure.  A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.  Water enters the chamber and is pumped away into the sanitary sewer.  

The SaniFlo SaniShower unit pumps the effluent upward to 12 feet and/or 100 feet horizontally (with gravity fall).  Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until water enters the unit again.  A normal operating cycle for the Sanishower can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

In addition to sinks, the SaniFlo SaniShower will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a shower, a urinal, etc.  When adding a shower, a base will have to be constructed.  This base should be made out of a 2" x 6" (minimum) or 2” x 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4”per foot gravity flow towards the pump unit.

The discharge elbow on the side of the SaniFlo SaniShower can be rotated 360 degrees to fit any type of installation required.  A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit.

This SaniFlo SaniShower unit has been designed with a vent output on the side of the unit.  All plumbing codes require connection to a vent system.  Please note that the vent system should be a two-way air vent.  It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit.

The SaniFlo SaniShower is small enough to fit comfortably inside a kitchen cabinet or vanity or even under a raised shower base.

The SaniFlo Sanishower has been certified to American and Canadian Standards.  Electrical standard UL 788, CA:  Electrical standard CSA C22.2 


Warranty Information

Saniflo offers a 2-year warranty for the pumps and a 1-year warranty for the toilet bowl and tank. The warranty starts from the date of purchase.

The warranty is voided when any foreign objects are found in the macerating unit. Pouring automobile anti-freeze, solvents paintings, acids, alkaloids, plastic bags, metal, plastic material, wood or anything that could halt, damage or corrode the unit, voids warranty. The motor is filled with oil and sealed for life at the factory; draining the oil out of the motor voids warranty as well.

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


You Recently Viewed...